1/3
Lilka — DIY Assembly Ki
A kit for assembling a portable gaming console based on the ESP32-S3. Includes all necessary components: the PCB, buttons, display, speaker, and connectors. Solder it yourself — get your own retro console with Wi-Fi, Bluetooth, SD card, and audio support. Battery is not included, but the board features a TP4056 charging module — you can optionally connect any Li-Ion battery for a fully standalone console. A great project for anyone who wants to learn soldering and get hands-on with electronics.
In Stock
Ships worldwide
Also available on
* Prices on external platforms may be higher due to marketplace commission fees.
SKU: lilka-kit
Components
32 parts- Capacitors
- Resistors
- Integrated Circuits
- Transistors & Diodes
- Passive Buzzer
- Connectors & Sockets
- Switches & Buttons
Components
32 parts- Capacitors
- Resistors
- Integrated Circuits
- Transistors & Diodes
- Passive Buzzer
- Connectors & Sockets
- Switches & Buttons
| Component | Details | Qty |
|---|---|---|
| Capacitors | ||
| C1 — decoupling on EN line | 1µF | 1 |
| C2, C3 — bulk filtering on power rail | 10µF | 2 |
| Resistors | ||
| R1 — pull-up on ESP32-S3 EN line | 10K | 1 |
| R2, R3 — voltage divider / pull-down | 100K | 2 |
| R4 — gate resistor for Q1 | 33K | 1 |
| Integrated Circuits | ||
| ESP32-S3-WROOM-1 | — | 1 |
| LDO Voltage Regulator | — | 1 |
| I2S Audio Amplifier Module | — | 1 |
| Transistors & Diodes | ||
| P-channel MOSFET | — | 1 |
| Rectifier Diode | — | 1 |
| Passive Buzzer | ||
| Buzzer | — | 1 |
| Connectors & Sockets | ||
| USB 2.0 PCB connector | — | 1 |
| MicroSD Adapter 3.3V | — | 1 |
| TP4056 Charge Controller Module | — | 1 |
| Audio Jack TRS | — | 1 |
| Pin Header | — | 1 |
| TFT Display Socket | — | 1 |
| TFT Display 240x280 | — | 1 |
| Switches & Buttons | ||
| Push Button 12mm | — | 8 |
| Push Button 6mm | — | 3 |
| SPDT Slide Switch | E-Switch EG1271 | 1 |